New Arrival
Skip to product information
Features
DJI Lito Series 360° Propeller Guard for DJI Lito X1 & Lito 1
The lightweight DJI Lito Series 360° Propeller Guard can fully wrap the propellers to avoid injury or damage by obstacles, for improved flight safety. Ideal for complex environments, helps beginners to fly more confidently indoors or in places with many obstacles.
1. Before installing the propeller guard on DJI Lito X1 or DJI Lito 1, ensure that the aircraft firmware has been updated to v01.00.0100 or later. Otherwise, flight stability cannot be guaranteed.
2. The aircraft will weigh more than 250 g after installing the propeller guard. Please carefully check and abide by local laws and regulations. If required, obtain the necessary approval and clearance from the related government agencies before flight.
3. Do not use the propeller guard in windy conditions.
4. When flying with the propeller guard installed, the aircraft's power performance and video transmission performance will be affected. Please control the flight speed, operate with caution, and keep an eye on the video transmission signal strength in the app at all times. When using a remote controller, the maximum takeoff altitude is 1500 m, the maximum flight altitude is 120 m, and the maximum flight distance is 500 m.
5. When flying with the propeller guard installed, the aircraft's obstacle sensing performance will be affected. Please fly in open areas whenever possible.
6. Regulatory requirements vary by country or region. In the EU and UK, the propeller guards can only be compliantly used on the aircraft from DJI Lito X1 Fly More Combo Plus (DJI RC 2). However, in the EU and UK, do not install the propeller guards and the Intelligent Flight Battery Plus at the same time. Otherwise, the total aircraft weight may exceed the applicable regulatory weight limit and may result in operational requirements. Always check and comply with local laws and regulations before flight.
DJI Warranty Information
Manufacturer's warranty for DJI products may vary depending on the part under question, batteries have 3-6 months manufacturer's warranty while the remote control might have 12 months manufacturer's warranty. More information can be found on the DJI Website.
Specifications
Weight: 94 g
Dimensions (L×W×H): 347×162×59 mm - One piece, each Propeller Guard
Maximum Dimensions After Installed (L×W×H): 347×412×84 mm (One Set)
Compatibility
DJI Lito X1
DJI Lito 1
What's in the Box
1x 360° Propeller Guard (Set of 2) for DJI Lito X1 & Lito 1 Drones
Warranty: 12 Months*
*Warranty period is as stated above unless the manufacturer has chosen to specify a longer period. All warranties are return to base unless otherwise specified.